User Tools

Site Tools


apple_macbook_pro_9_2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
apple_macbook_pro_9_2 [2018/01/24 16:18]
jmiralles
apple_macbook_pro_9_2 [2018/01/24 16:19] (current)
jmiralles
Line 52: Line 52:
  
  
-   ​1 ​su - +    ​su - 
-   2 yum install b43-fwcutter wget+    yum install b43-fwcutter wget
 Next use the instructions here, skipping b43-fwcutter installation part. Next use the instructions here, skipping b43-fwcutter installation part.
  
Line 61: Line 61:
  
  
-   ​1 ​sudo zypper install b43-fwcutter +    ​sudo zypper install b43-fwcutter 
-   2 sudo /​usr/​sbin/​install_bcm43xx_firmware+    sudo /​usr/​sbin/​install_bcm43xx_firmware
        
 **Ubuntu/​Debian **Ubuntu/​Debian
Line 70: Line 70:
  
  
-   ​1 ​sudo apt-get install firmware-b43-installer+    ​sudo apt-get install firmware-b43-installer
 You will be asked to automatically fetch and install the firmware into the right location. Again, you will need an internet connection. You will be asked to automatically fetch and install the firmware into the right location. Again, you will need an internet connection.
  
Line 84: Line 84:
  
  
-   ​1 ​emerge b43-fwcutter+    ​emerge b43-fwcutter
 and then follow the instructions below to download the Broadcom driver. The line that invokes b43-fwcutter will need to be changed to execute the program emerged above. and then follow the instructions below to download the Broadcom driver. The line that invokes b43-fwcutter will need to be changed to execute the program emerged above.
  
Line 103: Line 103:
  
  
-   ​1 ​wget http://​bues.ch/​b43/​fwcutter/​b43-fwcutter-018.tar.bz2 http://​bues.ch/​b43/​fwcutter/​b43-fwcutter-018.tar.bz2.asc +    ​wget http://​bues.ch/​b43/​fwcutter/​b43-fwcutter-018.tar.bz2 http://​bues.ch/​b43/​fwcutter/​b43-fwcutter-018.tar.bz2.asc 
-   2 gpg --verify b43-fwcutter-018.tar.bz2.asc +    gpg --verify b43-fwcutter-018.tar.bz2.asc 
-   3 tar xjf b43-fwcutter-018.tar.bz2 +    tar xjf b43-fwcutter-018.tar.bz2 
-   4 cd b43-fwcutter-018 +    cd b43-fwcutter-018 
-   5 make +    make 
-   6 sudo make install +    sudo make install 
-   7 cd ..+    cd ..
 If verification of the GPG signature fails due to an unknown key, you need to import the following key: If verification of the GPG signature fails due to an unknown key, you need to import the following key:
  
Line 118: Line 118:
  
  
-   ​1 ​export FIRMWARE_INSTALL_DIR="/​lib/​firmware"​ +    ​export FIRMWARE_INSTALL_DIR="/​lib/​firmware"​ 
-   2 wget http://​www.lwfinger.com/​b43-firmware/​broadcom-wl-5.100.138.tar.bz2 +    wget http://​www.lwfinger.com/​b43-firmware/​broadcom-wl-5.100.138.tar.bz2 
-   3 tar xjf broadcom-wl-5.100.138.tar.bz2 +    tar xjf broadcom-wl-5.100.138.tar.bz2 
-   4 sudo b43-fwcutter -w "​$FIRMWARE_INSTALL_DIR"​ broadcom-wl-5.100.138/​linux/​wl_apsta.o+    sudo b43-fwcutter -w "​$FIRMWARE_INSTALL_DIR"​ broadcom-wl-5.100.138/​linux/​wl_apsta.o
        
 If you are using the b43 driver from older kernel: If you are using the b43 driver from older kernel:
Line 127: Line 127:
  
  
-   ​1 ​export FIRMWARE_INSTALL_DIR="/​lib/​firmware"​ +    ​export FIRMWARE_INSTALL_DIR="/​lib/​firmware"​ 
-   2 wget http://​mirror2.openwrt.org/​sources/​broadcom-wl-5.10.56.27.3_mipsel.tar.bz2 +    wget http://​mirror2.openwrt.org/​sources/​broadcom-wl-5.10.56.27.3_mipsel.tar.bz2 
-   3 tar xjf broadcom-wl-5.10.56.27.3_mipsel.tar.bz2 +    tar xjf broadcom-wl-5.10.56.27.3_mipsel.tar.bz2 
-   4 sudo b43-fwcutter -w "​$FIRMWARE_INSTALL_DIR"​ broadcom-wl-5.10.56.27.3/​driver/​wl_apsta/​wl_prebuilt.o+    sudo b43-fwcutter -w "​$FIRMWARE_INSTALL_DIR"​ broadcom-wl-5.10.56.27.3/​driver/​wl_apsta/​wl_prebuilt.o
 Note that you must adjust the FIRMWARE_INSTALL_DIR path to your distribution. The standard place where firmware is installed to is /​lib/​firmware. However some distributions put firmware in a different place. Note that you must adjust the FIRMWARE_INSTALL_DIR path to your distribution. The standard place where firmware is installed to is /​lib/​firmware. However some distributions put firmware in a different place.
  
Line 137: Line 137:
  
  
-   ​1 ​export FIRMWARE_INSTALL_DIR="/​lib/​firmware"​ +    ​export FIRMWARE_INSTALL_DIR="/​lib/​firmware"​ 
-   2 wget http://​downloads.openwrt.org/​sources/​wl_apsta-3.130.20.0.o +    wget http://​downloads.openwrt.org/​sources/​wl_apsta-3.130.20.0.o 
-   3 sudo b43-fwcutter -w "​$FIRMWARE_INSTALL_DIR"​ wl_apsta-3.130.20.0.o+    sudo b43-fwcutter -w "​$FIRMWARE_INSTALL_DIR"​ wl_apsta-3.130.20.0.o
 Note that you must adjust the FIRMWARE_INSTALL_DIR path to your distribution. The standard place where firmware is installed to is /​lib/​firmware. However some distributions put firmware in a different place. Note that you must adjust the FIRMWARE_INSTALL_DIR path to your distribution. The standard place where firmware is installed to is /​lib/​firmware. However some distributions put firmware in a different place.
  
apple_macbook_pro_9_2.txt · Last modified: 2018/01/24 16:19 by jmiralles