This is a guide to running Linux with the Asus A6Jc laptop. This is a similar laptop to the Asus A6J except it has a NVIDIA graphics chip rather than the ATI chip.
This guide is intended to provide you details on how well this laptop works with Linux and which modules you need to configure. For details on how to actually install and configure the required modules have a look at our guides section for distribution specific instructions.
If you would like to edit this page please first view our Editing Guidelines.
|Processor||Intel Core Duo T2400 1.83GHz|
|Graphics||NVIDIA GeForce Go 7300|
|Network||10/100/1000 Ethernet, Intel 3945 802.11g Wireless, Bluetooth|
|Other||4 x USB2.0, 1 x Firewire, Webcam|
|Sound||Yes||Use the snd-hda-intel module|
|Wireless||Yes||Use the ipw3945 module|
|56K Modem||Not Tested|
|Card Reader||Not Tested|
|Camera||Yes||See Syntek DC-1125 Camera Driver Project|
The NVIDIA GeForce Go 7300 can use either the open source 'nv' module or the proprietary 'nvidia' module from NVIDIA. 3D support requires the usage of the proprietary module.
The wired networking on the Asus A6Jc is supported by the r1000 driver. Most Linux distributions don't have this driver so it will need to be installed manually. You can grab the driver from the Realtek website. However work has begun on the r8169 driver included in the kernel which should support this controller in version 2.6.19.
The Asus A6Jc has issues with its wired network controller but more up to date Linux distributions should take care of that issue. Apart from that the Asus A6Jc works well with Linux.