User Tools

Site Tools


Asus F3Jc


This is a guide to running Linux with the Asus F3Jc laptop. The F3Jc is a low cost laptop but still has some decent specifications. Linux compatibility is a bit hit and miss at the moment.

This guide is intended to provide you details on how well this laptop works with Linux and which modules you need to configure. For details on how to actually install and configure the required modules have a look at our guides section for distribution specific instructions.

Editing This Page

If you would like to edit this page please first view our Editing Guidelines.


NameAsus F3Jc
ProcessorIntel Core Duo T2250 1.73GHz
Screen15.4“ WXGA
Optical DriveDVD+-RW
GraphicsNVIDIA GeForce Go 7300
Network10/100/1000 Ethernet, Intel 3945 802.11g Wireless, Bluetooth
Other4 x USB2.0, 1 x Firewire, Webcam

Linux Compatibility

Optical DriveYes
WirelessYesUse the ipw3945 module
56K ModemNot Tested
FirewireNot Tested
Card ReaderNot Tested
ExpressCard SlotNot Tested


NVIDIA has a set of driver which provide 3D support for the NVIDIA GeForce Go 7300. You will need to install these drivers for 3D support. You may like to see our Configuring a nVidia graphics chip howto.

ALSA version 1.0.14rc1 or greater is required for the audio to work on the Asus F3Jc. At this time no distribution includes this so you will need to install it manually.

The r1000 driver is required for the network controller on the Asus F3Jc to function. Since this is a proprietary module not many Linux distributions include it so manual installation is necessary. You can obtain this driver from Realtek's site. Work is being done in kernel version 2.6.19 which should provide support for this as well.


A bit of configuration work is required for the Asus F3Jc so it may be a difficult laptop to deal with for beginners. Future kernel releases should make this easier eventually.

asus_f3jc.txt · Last modified: 2017/11/27 16:37 by don